Modernize Your Plant

For over 35 years R&B Plastics Machinery has helped plastics processors operate more efficiently. We understand plant-floor operations. Our experienced staff will develop custom blow molding and extrusion equipment or retrofit existing machines.

R&B modernizes blow molders, plastic extruders, trimmers – any brand, any model.

We invite you to visit our facility for a plant tour. Contact a representative to learn about discounted corporate rates at a local hotel. R&B Plastics is conveniently located near Ann Arbor, MI. We are a 30-minute drive from DTW airport or 50-minutes from Detroit. See below for driving instructions.

michigan based plastics machinery company
R&B Plastics Machinery, LLC
1605 East Woodland
Saline, MI 48176-1638 USA
info@rbplasticsmachinery.com
Map and Driving Directions

 

 

 

 

 

For Equipment Sales:
Dave Corson
Director Sales & Marketing
(734) 429-9421 Ext. 113
Fax: (734) 429-1805
Mobile: (734) 649-4229
dcorson@rbplasticsmachinery.com

For Equipment Sales:
Ken Caryl
Sales Manager
Work: (734) 429-9421 ext. 112
Fax: (734) 429-1805
Mobile : (734) 368-3303
kcaryl@rbplasticsmachinery.com

For normal business hours service and repair parts:
Dave Kohler
Service & Aftermarket Sales Manager
Work: (734) 429-9421 ext. 120
Mobile: (517) 605-7216
dkohler@rbplasticsmachinery.com

For Parts & Service Sales:
Jamie Wiebusch
Aftermarket Sales & Service Engineer
Work: (734) 429-9421 ext. 114
Fax: (734) 429-1805
Mobile : (517) 403-3853
jwiebusch@rbplasticsmachinery.com

For after hours/24 hour emergency service and repair parts:
Primary: Dave Kohler (517) 605-7216
Secondary: Jamie Wiebusch (517) 403-3853

President & General Manager
Fred Piercy

Director of Mechanical Engineering
Larry Weber

Electrical Engineering Manager
Jake Losee

Controller
Jacqueline Chuang

Human Resources/Office Manager
Kelly Piercy

Supply Chain Manager
Robert Caryl

Plant Manager
Jesse Wiebusch